Grout Haze & Limescale Remover

LTP Grout Haze & Limescale Remover is a ready for use first wash cleaner for removing cement-based grout haze from the surface of tiles without affecting the joint. For use on all types of glazed and polished porcelain, glazed ceramic, slate, quarry tiles, brick, mosaics, terracotta, granite and unpolished natural stones. Ideal for cleaning grout application tools. Periodic cleaning helps to control and remove hard water stains and limescale. Always test/practice on an inconspicuous area before proceeding to ensure that the finished result is satisfactory. Shake container well before use.

• Ready to use
• Removes Hard Water Stains and Limescale
• Suitable for Shower Enclosures and Glass Screens
• Suitable for Chrome and Stainless Steel
• Suitable for Interior and Exterior Use

Removing grout films:

• Wait for the grout to ‘firm off’ in the joint before application
• Spray and wipe the surface using a micro-fibre cloth
• Rinse the cloth in water, wring out and repeat until surfaces are free from cement residues
• For older stubborn residues spray on and scrub immediately using a white nylon scrubbing pad
• Wipe away the released residues using a micro-fibre cloth. No need to rinse

Removing hard water stains and limescale:

• Spray onto the surface and scrub immediately using white nylon scrubbing pad
• Wipe away the released residues using a micro-fibre cloth. Rinse and leave to dry

TIPS:

• Not suitable for use on stone surfaces that are polished, (i.e. polished marble, travertine or limestone)
• Sealed natural stone surfaces should be re-sealed after cleaning with this product
• Application does not affect chrome or stainless-steel fixtures or fittings
• Biodegradable solution does not emit harmful fumes
• Mask and protect any surface not to be cleaned